Multi-Input Digital Voice Dialer/Announcer

<< Previous in Telephone-Special Apps Next in Telephone-Special Apps >>

Price: $349.95
Part #: K2000DVA
Manufacturer: Viking Electronics
Mfr Part #: K2000DVA
Non-volatile memory (no batteries required)
Stores up to eight 32-digit numbers (sixty four 32-digit numbers total)
8 minutes of record time (1 minute per input)
Programmable message repeat counter
Programmable lap counter
Eight inputs programmable as normally open or normally closed and enabled or disabled
Programmable ring delay for remote programming and alarm polling
Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
Programmable resume timer for each input (time following reset for input to become active again)
Call progress detection
Programmable ringback limit for call progress
Remote security and access codes
Store caster mode
Local or remote programming and recording
RS-232 port for programming via a PC
Compatible with the RC-2A and RC-3 remote DTMF controllers

Power: 120V AC/12V DC 500 mA, UL listed adapter provided
Dimensions: 211mm x 160mm x 46mm (8.3" x 6.3" x 1.8")
Environmental: 0 degC to 32 degC (32 degF to 90 degF) with 5% to 95% noncondensing humidity
Talk Battery: 12V DC
Touch Tone Dialing: 120 ms on/off, 50 ms on/off
CPC Detection Time: 320 ms minimum
Message Record Time: 8 minutes
Sampling Rate: 64 K (equivalent)
Input Detection Time: 80 ms with Qualifier Timer set to 0
Resolution Qualifier/Resume Timers: 1 second, with 18 hours maximum capacity
Connections: (1) RJ11 jack for telco connection, (1) 3.5mm jack for 600-ohm audio output, (1) 9 pin RS-232 for connection to PC, (1) 12 position screw terminal block for inputs