Pagers-Radio - #2600T Water Detector with Sensor Probe

Undetected water damage, such as that caused by leaking pipes or corroded water heaters, cost homeowners tens of thousands of dollars each year. Such repairs are time consuming and costly to correct.

Applications could include computer room sub-floor areas, telephone equipment rooms, bathrooms, laundry rooms, any areas adjacent to a water storage tank or piping. Also evaporative air conditioners, drip pans, overflows and/or drains.
Using no mechanical parts, the GRI Water Sensors are triggered by a moisture bridge across the sensor contacts. The GRI Water Sensors can be installed to detect a layer of water as minute as 1/16 of an inch in depth.

These Water Sensors use an external power source to energize a built-in relay contact so battery power is not recommended. Used in a closed loop configuration, an alarm condition will occur when moisture is detected, or if power to the sensor is lost, and if the sensor should fail. The relay output can be wired directly to any alarm panel or can be used to actuate an external device, i.e. transmitter, annunciator, etc.

Additional Information

GRI Home Page

Your Cart Is Empty

©2004-2010 alarmland® is a registered trademark of H.E.S.E. inc.Graphic depictions of products are for informational use only and may not always accurately represent that particular product. We reserve the right to substitue any product for another manufacturer's product of equal or superior value. See the "Sales Terms" tab above for more information. We have been selling on the Internet since 1994. Company Founded in 1981. Sorry, we do not accept phone orders. Browse All Products by clicking here.

Custom Search