RF Remote Controlled Vehicle Security System from SECO-LARM. Features include built-in dual-stage glass break sensor (with remote microphone) and dual-stage shock sensor. Built-in starter disable relay and flashing light relay. Outputs for door lock/unlock and domelight. Offers 2-step door unlock output, Automatic Starter Disable, and more. Note: see also ENFORCER 300C, similar to E-300L, but with CODEBUMP™ Code Hopping for extra security. 1) Miniature Brain (31/8 x 31/4 x 11/4)" - Patented Q.Q.T. for quick and quiet test of alarm. - Patented Fail-Safe Arming verifies the alarm will arm. - Patented Phase-II Protection assures continual protection. (2) Two 3-Button, 3-Channel Transmitters - Ultra-slim design. - Arm/disarm up to 200 ft. - 68 billion possible codes. - Code learning of up to 4 transmitters. - RF codes stored in EEPROM are saved even if power is lost to the alarm brain for up to one year. - 2nd and 3rd channel RF outputs. - Chirp delete, zone and sensor bypass, and panic via remote. - Second car operation. - RF CodeWash™ deletes codes of all remotes (during code learning) to prevent use of lost or stolen remotes. (3) Dual-Stage Shock Sensor (patented) - Separate pre-intrusion & trigger adjustments. - Chirps siren if a light tap to the vehicle is detected, triggers alarm if a strong rap is detected. - Miniature size. Installs anywhere. (4) Dual-Stage Glass Break Sensor - Built-in, with remote microphone. (5) Multi-Tone Siren - Super-small, 3-tone, 124dB. No "Toy" sounds. - Chirps for armed, disarmed, pre-intrusion alert, sensor and zone bypass. - Patented Stay-Safe DisarmTMshuts off sounding siren without disarming the alarm. (6) 5-Function LED - Indicates alarm arming (in passive mode), armed, and disarmed, plus valet mode. - Indicates RF transmitter reception for troubleshooting (7) Multi-Function Push-Button - Valet (panic can still be activated). - Emergency Disarm (sets alarm to passive arming and gives a 10-sec. entry delay). - One-time override of passive arming. (8) Instant Triggering - Multiple inputs trigger alarm when trouble occurs: (-) doors, (+) doors, (-) hood/trunk, (-) external sensor, starter sensing. (9) Flashing Parking Lights (Built-in relay) - Flash continuously if alarm triggered. - Flash when transmitter is used & alarm is in valet. - Flash for armed, disarmed (special car locator function), pre-intrusion, zone bypass, sensor bypass & tamper. - Pos./neg. output, single- or dual-circuit. (10) Door Lock Outputs (+ or -) - Lock/unlock doors via remote, even while driving or in valet. - Programmable ignition-controlled door lock/unlock. - 2-Step door unlock output. (11) Starter Disable Output (Built-in relay) - Disables starter once alarm is armed. - Programmable Automatic Starter Disable function can automatically disable the starter after the engine is turned off even if the user forgets to arm the alarm. - Starter sensing triggers alarm if thieves attempt to start car. (12) Domelight Supervision - Turns domelight on for 15 seconds when disarming alarm. (13) Multiple Programming Functions - Active or Passive Arming. - Chirp or silent arming. - 0.4/6.4-sec. door lock/unlock output. - N.O./N.C. trigger input. - Autolock or active locking of doors. - Permanent disarm or automatic rearm. - Current and/or switch sensing (fan bypass). - Ignition-controlled lock/unlock ON/OFF. - Automatic Starter Disable ON/OFF.